Pixelink PL-A781 FireWire Cameras available Aegis Electronic Group

The Industrial Camera and Machine Vision Solutions Company

Component SolutionsSystem SolutionsTechnologyApplications

Block Camera CameraLink Firewire Gigabit Ethernet High Definition Infrared Radiation PoCL Pan Tilt Zoom (PTZ) Progressive Scan Ultraviolet

ROHS Compliance

>> Site Map

Machine Vision Cameras | Microscopy Cameras | OEM Imaging Modules | Video Converters

Pixelink PL-A781
6.6 Megapixel Monochrome Industrial Camera.
(View product brochure in ADOBE PDF)

PixeLINK PL-A782 Megapixel FireWire Camera and Imaging Modules

The PL-A781 is a cost effective high-resolution monochrome inspection camera. The 6.6 megapixel resolution allows fine details to be resolved within a larger field of view. The camera is fully controlled by software and can be synchronized with an external trigger and strobed illumination. A rich set of features makes the PL-A781 very flexible and easy to use. Fully enabled by software, the PL-A781 can be integrated quickly into industrial vision applications.

Specifications

Sensor	1" CMOS 2208 x 3000 resolution (7.73 mm x 10.50 mm - 13.1 mm diagonal) 3.5 µm square pixels Rolling Shutter
Pixel Size	6.0 µm × 6.0 µm, square
Array Dimensions	7.68 mm × 6.14 mm
Frame Rate in frames per second	ROI Size	Max Frame Rate
	2208 x 3000	5
	1584 x 1200	17
	1272 x 1008	25
	648 x 480	88
Performance	Spectral Range 400 – 1000 nm FPN – TBD PRNU – TBD Dynamic Range – 56 dB linear (TBD)
Triggering Strobe Flash	S/W or H/W (external) trigger (TTL to 12V) Two user-programmable outputs that can be used stand-alone or synchronized to trigger
Controls	Exposure (0.063 ms to 2 seconds) White balance and color gains Brightness (black level adjust) Gamma Frame Rate (2 fps to max)Trigger & Strobe Modes Region of Interest & Decimation Pixel format 8-bit or 10-bit
Other Features	Programmable LUT On-camera configuration memory FPN and PRNU correction (gain/offset correction, flat field correction – per pixel)
Compatibility	IIDC 1.31 Format 0, Modes 1, 3, 5 and 6 Format 7
Computer Interface	Two FireWire (IEEE 1394) connectors allow daisy chaining of the camera
Optical Interface	Standard C-mount 1" optics (Compatible with most 2/3" optics.) IR cut-off protective filter
Mechanical Interface	M3 threaded holes – 4 in front plate around C-mount and 4 in camera base
Trigger Interface	6 pin Hirose connector
Power Requirements	Power supplied over the FireWire bus Max consumption – 5 W
Size and Weight	Standard Configuration (PL-A782) H x W x L: 1.65" x 1.97" x 4.02" (41 mm x 50mm x 102mm) Weight (without lens): 200g
Environmental	FCC Class B & CE Shock – 50 G Vibration – 10 G (20 to 200 Hz) Temperature – 0° C to 50° C (non-condensing)
Status LED	Flashing red and green Signals indicate idle, operating, warning and failed status

FireWire^TM is a trademark of Apple Computer Inc.